What Are The 3 Main Types Of Plumbing Systems?

Plumbing systems are used in a building to provide water to various outlets. The distribution system provides water to kitchen and bathroom sinks and toilets, while the drainage system disposes of human waste through a network of pipes. Pipes used in the distribution system can be made of copper, GI, HDPE, and CPVC. CPVC plastic pipes are most commonly used for distribution systems. These pipes are lightweight and easy to install and maintain.


Potable water is water that has been heated to at least 120 degrees Fahrenheit for human consumption. This water is used for drinking, cooking, and bathing. Not potable water is known as sewage and is hazardous to health. A sewage treatment system separates the undesirable matter from the regular waste and allows the sanitary sewer system to discharge the water into a storm drain.

What are the 3 main types of plumbing systems

In addition to potable plumbing systems, homes and plumbers businesses have exterior drainage pipes transporting stormwater from their buildings to a storm drain. Additionally, backflow prevention devices are often required.

A potable plumbing system consists of straight pipes connected by fittings. These fittings change the pipes’ direction and connect additional pipe pieces if necessary. Some parts of the potable water plumbing system can deteriorate, and repair is required to ensure your water supply remains safe. Luckily, there are several ways to repair these pipes. One method is applying epoxy coatings to pipes. This will seal the holes and prevent further corrosion.

A potable plumbing system typically contains straight pipes that are either long or short. They are designed to quickly direct water to various areas of the house or building. The plumbing system also contains valves, which control the flow of water. Brass and gate valves are commonly used in potable plumbing systems to regulate the flow of water. The plumbing system also removes waste materials and human waste from a building, as well as water from activities. This waste is then discharged to the sewer system.


Sanitary plumbing systems consist of a series of pipes. Some are made of a single material, while others are made of a combination of materials. In any case, the type of pipes that you select depends on how you plan to use them. In order to make your sanitary drainage system efficient, you need to use fittings that have the least amount of resistance to flow. A fitting standard can help you with this.

The goal of sanitary plumbing is to make your surroundings as hygienic as possible. Dirty surroundings can lead to disease. To prevent these diseases, sanitary plumbing systems provide clean water and air & water heater replacement Anaheim. A clean environment is beneficial for everyone. This system is important for health, but there are also practical applications.

Sanitary plumbing systems should be checked regularly by a plumber. Damage to a sanitary plumbing system can be serious and need immediate repair. During heavy rainfall or snowmelt events, sewage can back up in a home. If you notice this, call a plumber immediately for a thorough inspection and repair.

Sanitary drainage systems must be sized properly to ensure that wastewater is discharged at an approved disposal point. A sanitary drainage system must also be correctly installed, and the components and materials should meet all codes. Basic sanitary plumbing systems include the installation of a building sewer, drainage fixture units for sizing the system, and sumps.


The purpose of stormwater plumbing systems is to transport and manage stormwater in the construction and maintenance of buildings. These systems are designed and installed at the same time as other services, such as sewers, and may be laid beneath the foundation of a building. While stormwater drains are not the same as sewers, they must meet the same requirements and follow the natural patterns of drainage. For this reason, it is important to consider easements and drainage patterns when designing stormwater drains for your buildings.

Rainwater plumbing systems can either be gravity-fed or pump-based. Gravity-fed systems allow rainwater to flow through the drainage system to a storage tank. These systems differ in size depending on the amount of rainfall and the amount of space available for collection. In cases where gravity is not sufficient, pump-based systems may be required. In these cases, a pump may be needed to move the water from the water tank to the home’s sewer system.

Stormwater plumbing systems are crucial to reducing flooding in cities and towns. These systems remove water that would otherwise be wasted in a landfill. They can also prevent sewage from clogging local waterways.