Top 5 Tips For Detailing Cars

Detailing your car is always a pain, but it doesn’t have to be if you take some basic precautions. You need to make sure that your car isn’t getting damaged in the process of detailing, and that you’re not contaminating the rest of the car as well.

After all, you don’t want your detailing supplies to be responsible for all the dirt and grease that get onto your freshly cleaned and waxed car, do you? Here are a few tips for keeping your detailing supplies clean:

Classic Car, Headlight, Detail, Vintage

Use a good detailer sprays and a micro fibre detailing cloth. The sprays and cloths will protect you from flying dirt and help to reduce the transfer of dirt and contaminants. They will also ensure that your car is getting cleaned at the same time.

Tips For Detailing Cars Review

The sprays are applied with a precision tipped nozzle, so that they get into all the nooks and crannies of the detailing cloth. This ensures that the chemicals used are carefully dispersed, and so that you don’t end up unnecessarily wetting and drying out you’re detailing supplies. The microfibre cloths, on the other hand, are designed to remove the small particles of dirt, and so will not cause any damage to the paintwork or finish.

Keep all detailing soap, detailing clay, and detailing rubber away from the Car Detailing Geelong fluids. These items will cause the detailing mud to stick to them and prevents you from being able to spray the mud away. If you accidentally get a mud or dirt film on the item, don’t rub it – just spray it off immediately with water or a detailing spray for microfibre.

Microfibre drying towels are ideal for removing dried mud from clothing. Always try to keep a couple of drying towels around for washing – this way you can remove and wash off mud quickly when the occasion arises.

Waxing and Detailing Clay

Waxing and detailing clay should always be done in the proper equipment. The right detailing spray suits the right detailing gun. When working with detailing mud, always ensure that you have some detailing clay with you, as detailing mud can be quite messy.

It is usually created by mixing mineral spirits with water and applying it to the surface with a detailing brush. This type of mud can cause the paint to smear. The best method is to dip a detailing brush into the mud itself, and then apply the detailing mud on the paintwork.

As far as auto detailing goes, a few other important ingredients are Nano Ceramic coatings and spray on paint protection. The Nano Ceramic coatings protect the car from damage from the sun’s ultra violet rays. This helps to prevent faded and cracking paintwork.

A lot of auto detailing companies recommend a certain type of paint protection, usually latex based. This type of paint protection can protect the paint from fading due to exposure to the sun and will also help to seal the paint job.

Conclusion

The last, but certainly not the least, is to keep a clean detailing towel handy at all times. A clean towel can be used to apply a clear topcoat, after which a detailing clay can be used to seal the topcoat.

After that, the detailing trays can be filled with detailing clay, before the topcoat can be applied. Cleaning your detailing cloth and a detailing towel before each and every detailing session is essential.